2010 Hatteras 60 Convertible

Description

You will not find a finer representation of the Hatteras 60 Convertible on the market.  This well equipped beauty is full of redundant features like two generators, two water-makers, four AC’s (Bridge deck, Cockpit,Interior x2), Fridge Freezers (Bridge Deck, Cockpit, Interior), and the desirable four stateroom layout for added company when you hit the high sea.  With only 1300 hours on the engines and roughly 700 hours on each generator there is plenty of hours to be spent before anything major must be overhauled.  If you are looking for a used yacht it is always nice to know that there is someone looking after the boat 24/7.  In this case there is.  A full time captain/crewman takes care of this vessel as if it were his own.  If that is not enough to convince you there is also a transferable warranty on the boat until 2018 for good measure!  Don’t miss out on this opportunity you won’t be disappointed. 

Layout Overview

Exterior Finish and Construction this boat is a perfect blend of speed and style with focus towards fish-ability. The Hatteras 60 hull is resin-infused producing a more uniform hull thickness and providing an ideal resin to glass ratio. It is also one of the few boats today that provides a rich coat of protective polyurethane paint producing a hard outer surface that provides protection from those gel-coated porous surfaces found within other brands.

• Isophthalic gelcoat, exterior layer
• Blister-resistant vinylester resin in hull bottom skin coat
• Hull and superstructure linear polyester/polyurethane coating
• Polymer/copper-based anti-fouling bottom paint Boot stripe, linear
• Polyester/polyurethane coating Decks, non-skid surface, polyurethane paint with
• Polymeric beads
• Solid fiberglass, resin-infused hull bottom
• Hull sides and superstructure resin-infused with PVC foam core Resin infused
• Fiberglass stringers
• Steel laminated in stringers at key locations to bolt engine mounts
• Engine room bulkheads and decks resin-infused composite construction using
• PVC foam core with layers of fiberglass laminate on each side